30 mm x 72 mm x 27 mm FAG NJ2306-E-TVP2 Cylindrical Roller Bearings

Cap bolt recommended tightening torque:4284.4 N·m; P180°:267 kN; H1:250.825 mm; R2:50.8 mm; H2:101.6 mm; Cap bolt, SAE grade:8; Ca:147.803 mm; PG:1/4 NPT; PosiTrac Plus contact element:2 x B10724-607; Eye bolt:2 x 1/2-13 UNC;

d:120.000 mm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:85200 N; B:28.00 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Fillet Radius ra:2.00 mm; D:180.0000 mm; Basic Static Radial Load Rating Co:800

Fatigue load limit Pu:68 kN; r5 min.:0.6 mm; da max.:84 mm; Calculation factor Y2:2.3; K:7.5 mm; r3,4 min.:1.5 mm; Calculation factor Y0:1.6; Da min.:111 mm; T:82 mm; Reference speed:3200 r/min;

Width A:47.6 mm; Dimension L:104.8 mm; Dimension F:19.1 mm; Weight W:2.05 kg; Dimension H1:47.6 mm; Thread Diameter G:1/2-13; Distance J:82.6 mm; Basic Dynamic Radial Load Rating C:25500 N; Dimension S1:25.4 mm; Insert Bearing IB:ZMaRC;

d:140 mm; Mass adapter sleeve assembly:3.8 kg; d3 max.:165.227 mm; B4:27 mm; G:149.555 mm; B1:84.582 mm; d1:125.412 mm; Lock nut:N 028; Hydraulic nut:HMVC 28E; Threads per inch:12;

Ew:35 mm; Mass needle roller and cage assembly:0.065 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 25x35x4; Fatigue load limit Pu:7.8 kN; Basic dynamic load rating C:44.6 kN; Limiting speed:17000 r/min; Designation associated SD design radial shaft seal wi

H2:44.45 mm; P120°:64.9 kN; A2:224.631 mm; J max.:333.375 mm; L:387.35 mm; da:84.138 mm; J min.:295.275 mm; Cap bolt recommended tightening torque:298.3 N·m; End plug (suffix Y):EPR 15; Cap bolt, SAE grade:8;

P60°:101 kN; Appropriate attachment bolt size G:0.625 in; Labyrinth ring:2 x LOR 188; Stabilizing ring:SR-18-15; H2:41.275 mm; Da:160 mm; da:80.963 mm; S:4.763 mm; Mass pillow block:22.4 kg; Initial grease fill:141.75 g;

Dw:11 mm; Ea:86 mm; d:80 mm; Reference speed:1200 r/min; Basic static load rating C0:1060 kN; Mass roller and cage thrust assembly:0.42 kg; Limiting speed:2400 r/min; Fatigue load limit Pu:108 kN; Roller and cage thrust assembly:K 89316 TN; Housing washer:GS 89316;

Lw:15.8 mm; r2 max.:1 mm; Mass needle roller:1.56 g; Dw:4 mm; r1 max.:0.8 mm; r1,2 min.:0.3 mm;

Accessories:Snap-Ring; D:80.0000 mm; d:25.000 mm; Basic Static Radial Load Rating Co:23600 N; Grease Speed Rating Open/Shielded n1:7700 rpm; Oil Speed Rating Open/Shielded n2:9400 rpm; B:21.00 mm; Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius ra:1.50 mm;

Oil Speed Rating Open/Shielded n2:32000 rpm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating Open/Shielded n1:26000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Basic Static Radial Load Rating Co:2360 N; D:28.0000 mm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:17000 rpm; B:8.00 mm; d:

Mass bearing:890 kg; r3,4 min.:6 mm; D:980 mm; d:690 mm; T:355 mm; Comparative axial load rating CFa:778 kN; Basic dynamic load rating C:9520 kN; Comparative radial load rating CF:2400 kN; Calculation factor Y2:3; Design variant/feature:TDI/Y2;

Oil Speed Rating n2:28000 rpm; D:80.0000 mm; Grease Speed Rating n1:20000 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:25100 N; Fillet Radius rb:0.30 mm; Basic Static Radial Load Rating Co:20400 N; Fillet Radius ra:1.00 mm; B:16.00 mm;

Grease Speed Rating Open/Shielded n1:20000 rpm; D:35.0000 mm; d:10.000 mm; Oil Speed Rating n2:26000 rpm; Sealed Speed Rating n3:15000 rpm; B:11.00 mm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:26000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:3400 N;