Angular Contact Ball Bearings

Contact Now

Angular Contact Ball Bearings designed to meet OE manufacturers' demanding requirements. These bearings have a contact angle that enables them to withstand significant axial loads in one direction together with radial loads. They are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets since an axial component is generated when a radial load is applied.

Product Features and Benefits:High Quality Steel - Bearing life extended by up to 80% with Ultra clean steel.Advanced Grease Technology - Special lubricants can extend grease life and increase performance.High Grade Balls - Smooth and quiet operation even at high speeds.Super Finished Raceways - Specially refined to reduce noise and improve lubricant distribution.Contact Angle - Available in 15, 25, 30 and 40 degree angles.Patented Seals - Prevent contamination in the toughest environments.Cages - Available in a range of polyamide, steel and brass cage assemblies.

12.598 Inch | 320 Millimeter x 18.898 Inch | 480 Millimeter x 2.913 Inch | 74 Millimeter CONSOLIDATED BEARING QJ-1064 Angular Contact Ball Bearings

Round With Snap Ring
Single Row Non-Fill C3

11.811 Inch | 300 Millimeter x 18.11 Inch | 460 Millimeter x 2.913 Inch | 74 Millimeter CONSOLIDATED BEARING QJ-1060 Angular Contact Ball Bearings

276000 lbf Chrome Steel
Lubrication Groove & C3

8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter CONSOLIDATED BEARING QJ-1044 Angular Contact Ball Bearings

Lubrication Fitting 3216
1-5/8 in Powder Coated

5.906 Inch | 150 Millimeter x 8.858 Inch | 225 Millimeter x 1.378 Inch | 35 Millimeter CONSOLIDATED BEARING QJ-1030 Angular Contact Ball Bearings

023519 10600 lb
2420 RPM 2.2500 in

0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter CONSOLIDATED BEARING 5202-2RS C/3 Angular Contact Ball Bearings

11/16 in Oilite®, Synthet
Plain Sleeve SAE 841, CT-1000-K26
1/32